Arc-fault detection device (AFDD)

70% of indoor fires are caused by faults in electrical wiring and electrical equipment

In places of disruption of normal electrical contact fault between the elements of electrical networks and electrical installations, sparking occurs, which is not recognized by circuit breakers, residual current devices or RCDs, because it does not cause an increase in current or its leakage to the ground.

AFDD detects dangerous sparking / arcing and disconnects the network from the power supply, preventing a fire.

  • Installed in an electrical panel
  • Protects against fire-hazardous sparking
  • Protects against overvoltageя
  • Complements a circuit breaker and RCD or RCBO
  • Complies with GOST IEC 62606-2016
  • Innovative development
  • Manufactured in Russia
    Loose contact
    Mechanical damage to the cable
    Pinched cable
    Cable defect
    Damage by rodents
    Imperfect contact
    Mechanical damage to the insulation
    Insulation damage or aging
    Twisting of copper and aluminum
     

    OPERATING CONDITIONS AND CHARACTERISTICS

    Model

    AFDD-С1-16А-1-2

    AFDD-С1-25А-1-2

    AFDD-С1-32А-1-2

    AFDD-С1-40А-1-2

    AFDD-С1-63А-1-2

    Operating temperature range, °C

    from -25 to +40

    Relative humidity

    not more than 98% at 25 ° С

    Continuous status indication (before and after triggering)

    Yes

    Front panel indication table

    Yes

    Overvoltage disconnection with threshold adjustment

    Yes

    Effective network voltage measuring method – True RMS

    Yes

    Voltage spikes protection

    Yes

    Installation in a switchboard on a DIN rail

    Yes

    TECHNICAL SPECIFICATIONS

    Model

    AFDD-С1-16А-1-2

    AFDD-С1-25А-1-2

    AFDD-С1-32А-1-2

    AFDD-С1-40А-1-2

    AFDD-С1-63А-1-2

    Response time in case of sparking, ms

    from 40 *

    Minimum detectable sparking current, A

    2.5

    Maximum load current of the protected circuit, A

    16

    25

    32

    40

    63

    Operating voltage range, V

    115-270

    Overvoltage disconnection threshold, V

    270

    Load disconnection time when voltage threshold is exceeded, ms

    200

    Load disconnection time when the voltage exceeds 300 V, ms

    30

    Power consumption, W

    0,7
    AFDD-С is manufactured in accordance with GOST IEC 62606-2016 и TU 27.12.23-003-05342780-2020.
    Certificate of conformity

    Write to us

    vt@istokmw.ru

    Call us

    8 (495) 465-8680